| Accident Date |
2020-06-16
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Struck by flying object
|
| Ocupation |
Fine coal plant operator
|
| Narrative |
Employee was working under the turn table of the clean coal stacker when the wind blew causing material to get into left eye. The material was embedded in the employee's left eye and was removed at the Dr's office.
|
|
| Accident Date |
2019-09-05
|
| Degree Inhury |
ACCIDENT ONLY
|
| Accident Type |
Accident type, without injuries
|
| Ocupation |
NO VALUE FOUND
|
| Narrative |
Contractor was hauling soil from the back side of gob hill. As EE was returning for another load, EE heard a pop in the engine and started smelling and seeing smoke in the cab. As EE stopped to make a check, the truck was on fire. EE tried to put the fire out with a fire extinguisher EE had along with another one from another truck. Fire Dept was called. No injuries.
|
|
| Accident Date |
2016-12-12
|
| Degree Inhury |
DAYS AWAY FROM WORK ONLY
|
| Accident Type |
Fall onto or against objects
|
| Ocupation |
Utility man, Shift tech, Service/Dump truck operator
|
| Narrative |
Employee was putting bolts in a piece of rubber on the vibrator lip when the walk board broke causing EE to fall into the chute. EE hit head shoulder and hip on the metal sides. EE had 6 staples in head.
|
|
| Accident Date |
2015-07-19
|
| Degree Inhury |
DAYS AWAY FROM WORK ONLY
|
| Accident Type |
Struck against a moving object
|
| Ocupation |
Bulldozer operator, Universal operator, Heavy equipment operator, Operating engineer
|
| Narrative |
Employee was operating a dozer while loading a train; a chute stopped up and was not feeding coal. After about 20 minutes of it not feeding the operator's were told to stay off of the feeder. The employee drove his dozer to close as he was feeding the main feeder and the dozer fell in bridge area of the feeder. The employee was not entrapped and he got out on his own.
|
|
| Accident Date |
2014-08-08
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Contact with hot objects or substances
|
| Ocupation |
Maintenance man, Mechanic, Repair/Serviceman, Boilermaker, Fueler, Tire tech, Field service tech
|
| Narrative |
EE was in the process of cutting a steel cable that was tangled on the D8N dozer at the trash dump. As ee lit the torch the first time it went out. As he was relighting it a buzzing nose and a ignition happened. This caused burns to the left elbow and low arm.
|
|
| Accident Date |
2014-06-16
|
| Degree Inhury |
DAYS AWAY FROM WORK ONLY
|
| Accident Type |
Struck by... NEC
|
| Ocupation |
Electrician, Lineman
|
| Narrative |
Magnet on raw coal B VIB, The hook broke and struck ee in the back of the head, also in the middle of his back.
|
|
| Accident Date |
2014-06-01
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Struck against stationary object
|
| Ocupation |
Laborer, Blacksmith, Bull gang, Parts runner, Roustabout, Pick-up man, Pitman
|
| Narrative |
This contractor was lifting a pipe up about 4ft to put it into place. The pipe weight was 140. The flange end had a sharp edge that wasn't noticed. Another EE was helping do this job.
|
|
| Accident Date |
2013-07-25
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Caught in, under or between a moving and a stationary object
|
| Ocupation |
Electrician, Lineman
|
| Narrative |
After employee had locked & tagged the belt out for repairs he decided to stay and help change the roller. This was a 54 in. troughing roller. While putting the roller in position to stand it up the roller slipped and mashed his left thumb between the belt frame and roller. 10 stitches to injury.
|
|
| Accident Date |
2013-02-21
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Struck by... NEC
|
| Ocupation |
Warehouseman, Bagger, Palletizer/Stacker, Store keeper, Packager, Fabricator, Cleaning plant operator
|
| Narrative |
Employee was trying to break loose a bolt with a wrench, in doing so the wrench slipped and hit him in the mouth, cutting his bottom lip and chipping his tooth.
|
|
| Accident Date |
2012-09-25
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Fall from ladders
|
| Ocupation |
Warehouseman, Bagger, Palletizer/Stacker, Store keeper, Packager, Fabricator, Cleaning plant operator
|
| Narrative |
While attempting to stop a leak on the refuse box, two workers were going to apply a patch by using a piece of belting and metal. Co-worker climbed up a permanent ladder and injured employee grabbed the closest ladder, the upper part of an extension ladder. As he climbed up the ladder, it slipped causing him to fall.
|
|
| Accident Date |
2012-01-16
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Struck by... NEC
|
| Ocupation |
Warehouseman, Bagger, Palletizer/Stacker, Store keeper, Packager, Fabricator, Cleaning plant operator
|
| Narrative |
EE was trying to dislodge a screwdriver from a shaker in the prep plant. EE missed hitting the screwdriver and hit his hand. This caused him to have 5 stitches.
|
|
| Accident Date |
2011-06-07
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Struck against stationary object
|
| Ocupation |
Electrician, Lineman
|
| Narrative |
EE was replacing 200 amp fuse for the deep well Pump D. While installing a fuse his right thumb made contact with the voltage barrier causing a laceration to the pad of right thumb.
|
|
| Accident Date |
2010-10-15
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Struck by... NEC
|
| Ocupation |
Pumper
|
| Narrative |
EE was cutting a piece of bucker rubber for repair on the vibrator. While sitting down, he was holding the rubber in his left hand and in his right hand he was using a belt knife to cut the rubber with. After cutting through the hard surface, he entered the soft spot part with extra force, causing the knife to slip and cut his upper leg.
|
|
| Accident Date |
2010-08-14
|
| Degree Inhury |
DYS AWY FRM WRK & RESTRCTD ACT
|
| Accident Type |
Fall from machine
|
| Ocupation |
Laborer, Blacksmith, Bull gang, Parts runner, Roustabout, Pick-up man, Pitman
|
| Narrative |
Pressure washer had quit. Worker climbed into back of truck, fixed the problem by securing a wire, turned around & fell off the truck. Initially, this was not a reportable accident because worker did not seek med. treatment & no time was lost. Worker did not seek med attn until 9/14/10 & was placed on restricted duty. Effective 9/20/10, he was off work completely.
|
|
| Accident Date |
2009-10-29
|
| Degree Inhury |
DAYS AWAY FROM WORK ONLY
|
| Accident Type |
Caught in, under or between running or meshing objects
|
| Ocupation |
Warehouseman, Bagger, Palletizer/Stacker, Store keeper, Packager, Fabricator, Cleaning plant operator
|
| Narrative |
Employee was in the coal loadout tunnel watching the belts while the train was being loaded. He noticed a piece of coal was stuck in the skirt rubber on the south side of the belt (main). He removed the piece of coal and the conveyor belt caught his right hand and arm
|
|
| Accident Date |
2009-07-28
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Struck by flying object
|
| Ocupation |
Warehouseman, Bagger, Palletizer/Stacker, Store keeper, Packager, Fabricator, Cleaning plant operator
|
| Narrative |
EE was grinding on a 988 loader bucket, as he was grinding down a vertical position, sparks were going down and to his right. Foreign material entered his left eye. Safety glasses with side shields were worn at the time of the injury.
|
|
| Accident Date |
2009-02-27
|
| Degree Inhury |
NO DYS AWY FRM WRK,NO RSTR ACT
|
| Accident Type |
Struck by... NEC
|
| Ocupation |
Welder (shop)
|
| Narrative |
Employee was grinding on a dozer blade. As he was grinding he felt like something was in his right eye. He finished the shift then he went to the nurses station & had it washed out. He then had to to to the Dr. to have a foreign object removed from his eye. Safety glasses with side shields were worn at the time of the accident.
|
|
| Accident Date |
2008-12-11
|
| Degree Inhury |
FATALITY
|
| Accident Type |
Struck against stationary object
|
| Ocupation |
Electrician helper
|
| Narrative |
Victim was in operation of Genie S-85 aerial lift when the lift became caught on exterior wall girt of building under construction. In an attempt to free the caught basket the machine's boom reacted after the basket came free, resulting in the victim's head receiving injuries which were fatal.
|
|
| Accident Date |
2008-03-31
|
| Degree Inhury |
DYS AWY FRM WRK & RESTRCTD ACT
|
| Accident Type |
Fall to lower level, NEC
|
| Ocupation |
Pumper
|
| Narrative |
EE was removing a chute from the #2 belt drive stand. On his last attempt to adjust the chain rigging, he stepped in a spot where a roller bearing had been removed, stepped in grease and his left foot slipped backwards and he fell through an opening in the floor, 12 ft to the ground. He started missing work 5-22-08.
|
|
| Accident Date |
2008-03-09
|
| Degree Inhury |
DAYS AWAY FROM WORK ONLY
|
| Accident Type |
Fall to lower level, NEC
|
| Ocupation |
Warehouseman, Bagger, Palletizer/Stacker, Store keeper, Packager, Fabricator, Cleaning plant operator
|
| Narrative |
Employee was standing on the North winch table hooking up ground for the welder. After hooking the ground up, he went to step off of the table and lost his footing, landing on uneven ground on his right leg. He started missing work 3/16/08. He will be off 4 months (ACL).
|
|
